Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation Download

Page: 16 / 190

Connecting More Computers to the LAN Ports

Connecting a computer to a LAN port on the FRITZ!Box

Connecting

Set aside the network cable (yellow) from the FRITZ!Box
package.

Switch on your computer.

If you work with a Linux operating system, configure
your network adapter with the setting “DHCP”, if this
setting is not already configured.

Insert one end of the LAN cable to the computer’s
network adapter.

Connect the other end of the network cable to the
socket on FRITZ!Box labeled “LAN 1” or “LAN 2”.

Now the FRITZ!Box and computer are connected to each
other.

Connecting More Computers to the LAN Ports

Additional cables are required to connect further comput-
ers. In purchasing a LAN cable, note the instructions in the
section “Network Cable” on page 118.

You can connect a computer to any of the two LAN ports of
the FRITZ!Box at any time.

INFO

WLAN

Festnetz

Festnet

Internet

Power

Power / DSL

DSL

Summary of Contents for Box Fon WLAN 7340































































































































































































Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands

Fritz! Box Fon WLAN 7340, Installation, Configuration And Operation

Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands