manualshive.com logo in svg

Fritz! Box Fon WLAN 7340, Installation, Configuration And Operation

Share
Download
Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation Download Page 103

103

Opening the User Interface of the FRITZ!Box

Opening the User Interface of the FRITZ!Box

The FRITZ!Box is equipped with a fixed IP address that 
cannot be changed. FRITZ!Box always can be reached at 
this IP address. This fixed IP address is:

Proceed as follows to open the FRITZ!Box user interface 
using this IP address:

1.

Connect the FRITZ!Box to the computer using the net-
work cable (yellow). For more information, see the 
section “Connecting Computers to the LAN Port” from 
page 15.

2.

Make sure that the computer obtains its IP address 
automatically. You can check this setting in the com-
puter’s IP settings (see section “Obtaining an IP Ad-
dress Automatically” from page 109).

3.

Restart your computer.

4.

Start your Internet browser and enter FRITZ!Box’s 
fixed IP address:

169.254.1.1

The FRITZ!Box user interface opens.

Fixed IP address

169.254.1.1

Once you have reached the FRITZ!Box user interface 
again, you should check the FRITZ!Box settings and cor-
rect them if necessary.

Summary of Contents for Box Fon WLAN 7340































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands