23 | © Frio 2021 - Rev. 0.3 - Updated 3/2/2021
5.7
R
EBOOTING THE
D
EVICE
In the unlikely event that the device freezes up or has other issues, you can reboot the device in one of two ways.
First, you can power cycle the device by turning the power to the device off from the circuit breaker. Wait until the
power loss screen goes blank and all lights on the device are off. Turn power to the device back on to restart.
Second, you can use a small diameter pin to press the reset button located in between the status and alarm LEDs. This
will power cycle the processor and reboot the device.
Please contact Frio to notify us of any issues that cause the device to freeze up.
5.8
C
LEARING
D
EVICE
S
ETTINGS
Users may reset the device to factory default settings and clear the network credentials from the device if needed.
Restoring the factory default settings does not clear the network credentials. Clearing the network credentials does
not reset any other device settings. To completely clear the device of all settings, the user should restore the factory
default settings and then clear the network credentials.
5.8.1
Restore Factory Default Settings
To restore the factory default settings, select
Settings
from the
Main Menu
, then select
Advanced Settings
from the
Settings Menu
. Select
Restore Default Settings
from the
Advanced Settings Menu
. You will be asked if you want to
Reset and Reboot?
Select
Yes
to reset the device to the factory default settings.
5.8.2
Clear Network Credentials
To clear the Wi-Fi credentials from the device, select
Settings
from the
Main Menu
, then select
Advanced Settings
from the
Settings Menu
. Select
Network Settings
from the
Advanced Settings Menu,
then select
Clear Network
Credentials
. You will be asked if you want to
Clear All Credentials?
Select
Yes
to clear the Wi-Fi credentials and restart
the BlinkUp process. You will need to Blink Up the device again in order to connect to a network.
5.9
O
FFLINE
D
EVICES
To use the device offline without connecting to the internet, simply perform all setup steps except for network
provisioning. Do not use the Frio App to give the device network credentials.
Frio recommends disabling networking on offline devices as this will disable the network connection alarm.
Offline devices will not have access to the Frio Cloud platform and will not be able to use any cloud features. Offline
devices will not have access to any firmware updates.