Frigidaire LGUB2642LF2, Service Manual

Page: 114 / 187

Component Teardown
6-8
Toe Grille Removal
To remove the toe grille, press the locking tabs on the
bottom of toe grille then lift straight up until the three
clips are free of the spacer screws.
To reassemble:
1. Three clips slide over spacer screws
2. Tabs lock into place in slots on outside edge of the
anti-tip bracket. (See Figure 6-24)
Anti-tip Leg Removal
To remove the anti-tip leg
1. Slightly open freezer drawer and remove toe grille.
2. Rotate anti-tip leg clockwise until it does not contact
the floor.
3. Extract the three bolts securing the anti-tip leg to
the unit frame and remove from unit.
(See Figure 6-25)
Eyebrow Trim Removal
NOTE: The eyebrow trim, switches and humidity sensor
mounted under the eyebrow trim are only used on mod-
els equipped with a dispenser.
The eyebrow trim extends across the front top of the
unit cabinet and covers the door switches, wire harness
and humidity sensor.
To remove the eyebrow trim:
1. Remove upper hinge covers.
2. Extract the screws securing the eyebrow trim to the
unit frame.
3. Turn the eyebrow trim over to access the wire
harness connections to the door switches and
humidity sensor. Disconnect from the wire harness
at the connections from under the hinge covers.
(See Figure 6-26)
Figure 6-24.
Figure 6-25.
Spacer Screws
Toe Grille
Must Fit In Slot On
Anti-tip Bracket
Bolts
Figure 6-26
.
Screws
Door Switches