WHEN ALL HOOKUPS ARE
COMPLETED
Make sure all controls are left in the off position.
Make sure the flow of combustion and ventilation
air to the cooker is unobstructed.
Check that all packing materials and tape have
been removed. This will include tape on metal
panel under control knobs (if applicable), adhesive
tape, wire ties, cardboard and protective plastic.
Failure to remove these materials could result in
damage to the appliance once the appliance has
been turned on and surfaces have heated.
7
INSTALL AND CHECK
ANTI-TIP DEVICE
Never completely remove
the leveling leg as the cooker will not be
secured to the anti-tip device properly.
Follow instructions supplied with ANTI-TIP bracket
8
LEVEL THE COOKER
Never completely remove the
leveling leg as the cooker will not be secured to
the anti-tip device properly.
A.
Plug in the unit.
B.
Measure the height of your countertop at the
rear of the opening
(
X
)
.
C.
Adjust two rear leveling legs so that the rear of
hob is at the same height as the counter (Y).
D.
Slide unit into place.
E.
Install oven shelves in the oven and position the
cooker where it will be installed.
F.
Check for levelness by placing a spirit level on
one of the oven shelves. Take two
readings—with
the level placed diagonally first in one direction
and then the other.
G.
Adjust front leveling legs until the cooker is level.
H.
Look under the unit and verify that the rear leg
is fully engaged with the anti-tip device. If not,
remove the unit and adjust the height of the
rear leg so that it is properly engaged.
Anti-Tip Bracket
Kit
Included
Spirit level
X
Y
28
WARNING
WARNING
Summary of Contents for FNG576CFSSB
Page 30: ...NOTES 30 ...
Page 31: ...NOTES 31 ...
