7
These flames are too
large for the pot
Burners should be
Push the control knob in and
turn it to the LITE position.
Surface Burners
DAILY USE
How to Light a Surface Burner
WARNING
operated only when covered by
cookware. Burner flames not covered
by cookware present a risk of fire or
clothing ignition. Never let flames
extend beyond the sides of the
cookware. Failure to comply may result
in serious injury.
Make sure all burners are in their correct
locations and
fully assembled before
attempting to operate any burner. Select
a burner and find its control knob. Push
the knob in and turn it to the
LITE
position.
You will hear a clicking noise—the sound
of the electric spark igniting the burner.
When one burner is turned to LITE, all
burners will spark.
Sparking will
continue as
long as the
knob remains
at LITE. Once
gas is ignited,
turn the knob
to adjust the
flame size.
After Lighting a Burner
• Do not operate the burner for an extended
period of time without cookware on the
grate. The finish on the grate may discolor
or chip without cookware to absorb the
heat.
• Do not attempt to disassemble any burner
while another burner is on. An electric
shock may result, which could cause
you to knock over hot cookware.
• Be sure the burners and grates are cool
before you place your hand, a pot holder
or cleaning materials on them.
How to Select Flame Size
Watch the flame, not the knob, as you adjust
heat. When rapid heating is desired, the
flame size on a burner should match the
size of the cookware you are using. Flames
larger than the bottom of the cookware will
not heat faster and may be hazardous.
Summary of Contents for FNG576CFSSB
Page 30: ...NOTES 30 ...
Page 31: ...NOTES 31 ...
