Oven Light Bulb
NOTE:
The glass cover should be removed
only when cold. Wearing latex gloves may
offer a better grip.
Before replacing the bulb, disconnect electrical
power to the oven at the main fuse or circuit
breaker panel. Let the bulb cool completely
before removing it. For your safety do not
touch a hot bulb with a damp cloth. If you
do the bulb may break.
To remove:
Turn the glass cover counterclockwise
1/4
turn until the tabs of the glass cover clear
the grooves of the socket. Remove the bulb.
To replace:
Put in a new 40-watt appliance bulb. Place
the tabs of the glass cover into the grooves
of the socket. Turn the glass cover clockwise
1/4
turn.
NOTE:
A 40-watt appliance bulb is smaller than a
standard 40-watt household bulb.
Reconnect electrical power to the oven once
the new bulb is installed.
For improved lighting inside the oven, clean
the glass cover frequently using a wet cloth.
This should be done when the oven is
completely cool.
Bulb
Socket
Tab
3
1 2
”
Max
length
Glass cover
To Remove the Door:
1. Fully open the oven door.
2. On each hinge, slide the hinge lock up,
making sure it snaps into its fully raised
position.
3. Firmly grasp both sides of the door at
near the top.
4. Close door until the top of the door is
approximately 3” from the cooker frame.
5. Lift door up and away from the cooker until
both hinge arms are clear of the slots in
the cooker frame.
Pull hinge locks up to unlock
Notch
Push hinge locks down to lock
Removal position
Lift-Off Oven Door
The door is very heavy. Be careful when removing and lifting the door. Do not lift door by
the handle.
If improperly removed, oven door hinges may suddenly open and can
17
WARNING
cause personal injury to appendages near the hinge. Follow instructions below to avoid a
risk of injury when removing and re-installing the oven door.
Summary of Contents for FNG576CFSSB
Page 30: ...NOTES 30 ...
Page 31: ...NOTES 31 ...
