16
Information:
A piping may only be commissioned after successful pressure test (see
EN 805, EN 12007 and DVGW G 469, W 400). The guidelines of the
DVGW leaflets for pressure tests, the European standards or the
country-specific regulations are to be observed.
Information:
The detachment of the outer armouring wire during the cooling down
stage is caused by the thermal expansion characteristics of the fused
joint and does not present a problem.
5.
Saddle parts - Top Loading
FRIALEN
®
TL saddle parts are used with pipes from SDR 17 to SDR 11
from d 250 mm. The processing occurs with the FRIATOP Clamping Unit
(Figure 15b).
5.1
DAA-TL Pressure Tapping Tees - Top Loading, d 250 - 315 (400)
FRIALEN
®
DAA-TL
Pressure Tapping Tees Top-Loading
are suitable for
fitting as branch connectors onto unpressurised or pressurised pipelines.
WARNING!
FRIALEN
®
pressure tapping valves
≥
d 355 mm may be processed
using only SDR 17 and SDR 17,6
pipes due to tapping technique.
Processing temperature: between
0
°
C and 45
°
C.
Figure 13
FL_2104_8_GB_II_08.p65
25.03.2008, 9:48 Uhr
16
Summary of Contents for FRIALEN
Page 31: ...31 ...
