Fresenius Kabi OPTIMA PT-VS-S, Technical Manual

Page: 44 / 106

44 optfiche_002b_en.fm
P
re
v
e
n
ti
v
e
mai
n
te
nan
c
e
Observations:
13
!
Check the upstream pressure. (Only Optima VS )
"
Start an infusion at 100 ml/h without drop detector.
"
Clamp the tube between the drop chamber and the pump.
"
Check that the upstream occlusion alarm is activated within 10 seconds.
"
Unclamp.
"
Check that the confirmation indicator lights up.
14
!
Check the clamp.
"
Place a water pipe in the device.
"
Close and open the door.
"
Check that the clamp lock the tube.
#
There should be no dripping at the tube outlet.
15
!
Check the battery operation.
"
Disconnect the mains lead.
"
Check the presence of the battery indicator.
"
Reconnect the mains lead.
"
Check if the battery indicator is switched off and that the mains indicator lights
up.
16
!
Check the flow rate.
Before any flow rate test, run an infusion of 20 ml to stabilise the flow rate.
"
Carry out a flow rate check in accordance with the norm EN 60601-2-24.
"
Check that the flow rate error is between - 5% and + 5%.
If there is too much discrepancy, refer to chapter 7 "Calibration / Calibration
procedure /
EtAL.2
calibrating the flow rate corrector coefficient".
17
!
Check the battery autonomy.
"
Start an infusion at 125 ml/h for 4 hours.
18
!
Carry out an electrical safety test according to norm EN 60601-1-2
N° Procedure Obtained value
Conformity
Yes No
Name: Date: Visa: