Fresenius Kabi OPTIMA PT-VS-S Technical Manual Download Page 23

Page: 23 / 106

optima03.1_001b_en.fm

Des

of th

e me

nus

3.1.1 Access to the menu

Activate the After-Sales Service test menu.

Keep the "MODE" button pressed, during the device
switch on.

The various menus are displayed.

Select the "Maintenance" menu and confirm.

Type in the access code and confirm.

Select "Sav" and confirm.

Use the selection keys to scroll through the various tests on
the LCD display.

Key

Function

switches on the device.

OFF

switches off the device and exits the configuration mode when

pressed for more than three seconds.

SILENCE ALARM

MODE

accesses the configuration mode.

The selection keys scroll through the numbers and letters, the tenths,
units and tens values.
Activate or de-activate choices.

ENTER

moves the cursor.

START

validates a selection.

STOP

cancels the current configuration.

Summary of Contents for OPTIMA PT-VS-S











































































































Search results

Summary of Contents for OPTIMA PT-VS-S

Reviews:

Brands by name

Popular brands

Fresenius Kabi OPTIMA PT-VS-S, Technical Manual

Search results

Summary of Contents for OPTIMA PT-VS-S

Reviews:

Brands by name

Popular brands