Fresenius Kabi OPTIMA PT-VS-S, Technical Manual

Page: 21 / 106

optima03.1_001b_en.fm 21
Des
c
ri
p
ti
on
of th
e me
nus
3 Description of the menus
3.1 Parameter configuration menu
The configuration menu adapts the Optima to the particular needs of each department. It
accesses the menus that customise the infusion parameters.
Fresenius Vial recommends the presence of its qualified staff, or a member of your Technical
Department, who will assist you in implementing the configuration procedures you wish to
select.
The configuration mode is activated by holding down the "MODE"
key when the device is switched on.
The following menus are displayed:
!
User setting,
!
Wards setting,
!
Maintenance.
Each menu consists of sub-menus. The sub-menus can be accessed
by using the "START" key.
To access some of the sub-menus, you need to type in an access code. This code can be
defined and/or de-activated in the Service configuration mode. As long as the device is kept
switched on, the code does not need to be keyed in again.
Main Menu Key in code Sub-menu Sub-menu
User setting Code XXXX
User setting menu
Wards setting Code 0200
Wards setting menu
Maintenance This code will be communicated at the end of the maintenance
technician training.
Test
Maintenance tests menu
After-sales configuration
Maintenance configuration
menu
Calibration
Calibration menu