Replacing front light bulbs (vehicles with hal‐
ogen headlamps)
Overview of front light source types
You can replace the following light sources.
Halogen headlamps
1
High beam/daytime running lights:
H15 55 W/15 W
2
Low beam/perimeter lights: H7 55 W/W 5 W
3
Turn signal lights: 3457 NAK 28 W
Replacing halogen headlamps
Requirements:
R
Low beam: bulb type H7 55 W
R
High beam/daytime running lamps: bulb
type H15 55 W/15 W
R
Perimeter lights: bulb type W 5 W
R
Turn signal lights: bulb type 3457 NAK
28 W
1
Low beam/perimeter light housing cover
2
High beam/daytime running lamps housing
cover
3
Turn signal light socket
#
Switch off the lighting system.
#
Low beam/perimeter light: remove housing
cover
1
towards the rear.
#
Pull out the socket towards the rear.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the
base of the socket.
#
Align and insert the socket.
#
Attach housing cover
1
.
#
High beam/daytime running lamps:
remove housing cover
2
towards the rear.
#
Turn the socket counter-clockwise and pull it
out.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the
base of the socket.
#
Insert the socket and turn it clockwise.
#
Attach housing cover
2
.
#
Turn signal light:
#
Turn socket
3
counter-clockwise and
remove it.
#
Gently turn the bulb counter-clockwise and
take it out of the socket.
#
Insert the new bulb into the socket and turn it
clockwise.
#
Insert socket
3
and turn it clockwise.
88 Light and vision
