Example: central locking buttons in the driver's
door
#
To lock/unlock the entire vehicle: press
button
1
(unlock) or
2
(lock) when the
doors are closed.
Switching the automatic locking feature
on/off
When the ignition is switched on and the vehicle
is driving at a speed above 9 mph (15 km/h), the
vehicle locks automatically.
Example: central locking buttons in the driver's
door
There is a danger of being locked out when the
function is activated in the following situations:
R
When tow-starting or pushing the vehicle
R
On the roller dynamometer
#
When the doors are closed, switch on the
power supply or ignition.
#
To switch on: press and hold button
2
for
approximately five seconds.
An acoustic signal sounds.
#
To switch off: press and hold button
1
for
approximately five seconds.
An acoustic signal sounds.
Unlocking/locking the driver's door with the
emergency key
%
If you want to lock the vehicle completely
with the emergency key, press the button for
the locking mechanism from inside first with
the driver's door open. Then lock the driver's
door with the emergency key.
#
To unlock: turn the emergency key counter-
clockwise to position
1
.
#
To lock: turn the emergency key clockwise to
position
1
.
%
Right-hand drive vehicles: turn the emer‐
gency key in the opposite direction in each
case.
Using the grab handles when getting into and
out of the vehicle
The entrances on buses are equipped with grab
handles and steps.
%
To avoid risks:
R
When getting into and out of the vehicle,
only use the grab handles and steps. Only
they are designed for such a load.
R
Keep steps and entry sills free from dirt,
e.g. mud, clay, snow and ice.
Opening and closing 47
