Freestyle FS84840 User Manual Download Page 1

Page: 1 / 14

ENGLISH

S1. Set/recall button
S2. Start/lap button
S3. Mode button
S4. Light/stop/reset button

DISPLAY MODES:

The watch has four display modes:
HOME TIME (T1) / FOREIGN TIME (T2),
ALARM, CHRONOGRAPH (CHRONO)
and TIMER.

To change from one display mode to
another, press S3 button once.

NOTE: In any setting mode, when there
is no button pressed for approximately
150 seconds, the watch will automati-
cally save the entered data and exit the
setting procedure.

HOME AND FOREIGN TIME DISPLAY:

To display FOREIGN TIME mode, press
and hold S2 button when HOME TIME
mode is displayed. The mode descrip-
tion (T2) will be displayed and blink
for approximately 5 seconds before
switching to FOREIGN TIME mode. To
change back to HOME TIME mode,
press and hold S2 button again.

TO SET THE TIME AND CALENDAR:

1. Press S3 button to select HOME

TIME / FOREIGN TIME mode.

2. Press and hold S1 button, the

message “HOLD TO SET” will
be displayed for approximately 3
seconds and the time zone setting
will blink.

4. Press S2 or S4 button to toggle

between HOME TIME (TIME 1) and
FOREIGN TIME (TIME 2) to set.

5. Press S3 button, the hour digits will

blink. Press S2 button to increase
or S4 button to decrease the value.
Holding down the button will speed
up the process.

6. Press S3 button, the minute

digits will blink. Press S2 button to
increase or S4 button to decrease

the value. Holding down the button
will speed up the process.

7. Press S3 button, the second digits

will blink. Press S2 or S4 button to
reset the second digits to zero.

8. Press S3 button, the day (of the

week) will blink. Press S2 or S4
button to cycle forward or backward
through the 7 days.

9. Press S3 button, the month digits

will blink. Press S2 button to in-
crease or S4 button to decrease the
value. Holding down the button will
speed up the process.

10. Press S3 button, the date digits will

blink. Press S2 button to increase
or S4 button to decrease the value.
Holding down the button will speed
up the process.

11. Press S3 button, the hour format

setting will blink. Press S2 or S4
button to toggle between 12-hour
and 24-hour format. The A.M. (A) or
P.M. (P) indicator may be displayed
to indicate the time period 12:00
A.M. – 11:59 A.M. or 12:00 P.M. –
11:59 P.M. respectively in 12-hour
format.

12. Press S3 button, the calendar

format setting will blink. Press
S2 or S4 button to toggle between
month-date (MM-DD) and date-
month (DD-MM) format.

13. Press S3 button, the hourly chime

(CHIME) setting will blink. Press
S2 or S4 button to toggle between
ON and OFF for the hourly chime
setting.

14. Press S3 button, the “BEEP” setting

will blink. The “BEEP” option will
cause the watch to beep anytime a
button is pressed. Press S2 or S4
button to toggle between ON and
OFF for the beep setting.

15. When finished making all the set-

tings, press S1 button to confirm.

NOTE: The hourly chime and beep
settings will apply to both HOME TIME
mode and FOREIGN TIME mode.

TO SET THE ALARM TIME:

1. Press S3 button to select ALARM

mode.

2. Press S1 button, the message “SET”

will be displayed and the hour
digits will blink. Press S2 button to
increase or S4 button to decrease
the value. Holding down the button
will speed up the process.

3. Press S3 button, the minute digits

will blink. Press S2 button to in-
crease or S4 button to decrease the
value. Holding down the button will
speed up the process.

4. Press S3 button, the A.M. (AM) or

P.M. (PM) indicator will blink. Press
S2 or S4 button to toggle between
A.M. and P.M.

5. Press S3 button, the alarm frequen-

cy setting will blink. Press S2 or S4
button to cycle forward or backward
through daily (DAILY), weekdays
only (WKDAYS) and weekends only
(WKENDS).

6. When finished making all the set-

tings, press S1 button to confirm.

NOTE: The A.M. / P.M. setting is avail-
able only when 12-hour format is se-
lected for the HOME TIME / FOREIGN
TIME mode currently displayed.

NOTE: The alarm will automatically be
activated after being set.

TO TURN ON/OFF THE ALARM:

In ALARM mode, press S2 button to
toggle between ON and OFF for the
alarm. When the alarm is ON, the
alarm indicator

will appear.

WHEN AN ALARM GOES OFF:

A 20-second alarm tune will be emitted
at the designated time when the alarm
is activated. To stop the tune, press
any button.

If the alarm tune is done without any
user interruption, the watch will au-
tomatically enter a snooze mode. The
alarm will go off again after 5 minutes
but for only once.

TO USE CHRONOGRAPH:

1. Press S3 button to select CHRONO-

GRAPH mode.

2. The chronograph will then be dis-

played in its current state – stopped,
running, or reset.

3. To resume a stopped counting, press

S2 button to resume from where
it left off.

4. To start a new counting, reset the

chronograph to zero first.

Press S4 button to stop counting,

then press and hold S4 button. The
message “HOLD TO RESET” will be
displayed for approximately 2 sec-
onds and the counter will be reset to
zero.

For changing the chronograph display
format:
In CHRONOGRAPH mode,
1. Make sure the chronograph is in the