Cyclone PRO User Manual
35
CYCLONE PRO
5.1.1.3
HCS08
The user may configure the Cyclone PRO to operate on an HCS08 target by
selecting HCS08 from the Specify Target Architecture drop-down menu.
Alternatively, the user may select the HCS08 target through the File menu.
Figure 5-5
shows the HCS08 specification configuration.
The target BDM header connections are shown on the right-hand side for
user reference. The Cyclone PRO will automatically detect the
communications speed.
Figure 5-5: HCS08 Class Settings
5.1.1.4
RS08
The user may configure the Cyclone PRO to operate on an RS08 target by
selecting RS08 from the Specify Target Architecture drop-down menu. The
Cyclone PRO will automatically detect the target frequency and voltage. The
Cyclone PRO provides all necessary voltage for programming.
