Hardware Description
KT912F634UG User’s Guide Rev. 2.0 10/2013
12
Freescale Semiconductor, Inc.
Archive Information
Archive Information
7.3.2
LIN Connector J1
The LIN connector allows a connection to the LIN bus, and provides alternate power to the board. It is a MOLEX
multi-pole connector 39-30-3035 (4.20 mm pitch, right angle), and its mating part is MOLEX 39-01-4030.
7.3.3
Power Connectors J2, J3
Power connectors J2 (positive supply - red) and J3 (ground - black) are sockets for widely used 4.0 mm banana
jacks.
7.3.4
BDM Connector J4
A standard BDM connector (header 2x3, 2.54 mm (0.1”) pitch) is placed on the EVB, to provide the user an
external BDM programming/debugging interface connection. The pin assignment is listed in
Table 6
.
Table 5. LIN Connector J1
Pin No.
Description
1
LIN GND
2
Supply voltage
3
LIN bus
Table 6. BDM Connector
Pin No.
Description
1
BKGD
2
GND
3
-
4
/RESET
5
-
6
+5.0 V
