Freescale Semiconductor KIT912F634EVME, User Manual, Page: 15 / 45

Hardware Description
KT912F634UG User’s Guide Rev. 2.0 10/2013
Freescale Semiconductor, Inc. 15
Archive Information
Archive Information
7.3.9 USB Connector J101
Connector J101 is a standard USB connector type B. It enables connection of the EVM to a PC or notebook.
7.3.10 TBDML Programming Connector J102
Connector J102 enables programming of the TBDML firmware in EVM production.
7.4 Test Points
27 test points are on the EVM. The schematic is marked with reference numbers, as well as signal names. The
board is only marked with signal names. The following
Table 12 summarizes the test points.
Table 11. USB Connector J9
Pin No. Description
1 +5.0 V
2 USBDM
3 USBDP
4 GND
Table 12. Test Points
Reference
designator
Signal name
Reference
designator
Signal name
TP1 HS1 TP14 V
_SUPP
TP2 HS2 TP15 +5.0 V (VDDX out)
TP3 LS1 TP16 LIN
TP4 LS2 TP18 AD0
TP5 ISENSE_H TP19 AD1
TP6 ISENSE_L TP20 AD2
TP7 Hall SUP TP21 2.5 V (VDD out)
TP8 L0 TP22 +5.0 V (VDDX out)
TP9 L1 TP23 GND
TP10 L2 TP24 AN_GND
TP11 L3 TP25 GND
TP12 L4 TP26 GND
TP13 L5 TP27 GND