manualshive.com logo in svg

Freescale Semiconductor FlexRay MFR4310, Reference Manual

Share
Download
Freescale Semiconductor FlexRay MFR4310 Reference Manual Download Page 25

MFR4310 Reference Manual, Rev. 2

Freescale Semiconductor

25

 

Chapter 1  
Introduction

This reference manual provides information on a system that includes the MFR4310 FlexRay 
Communication Controller Module.

1.1

Audience

This reference manual is intended for application and system hardware developers who wish to develop 
products for the FlexRay MFR4310. It is assumed that the reader understands FlexRay protocol 
functionality and microcontroller system design.

1.2

Additional Reading

For additional reading that provides background to, or supplements, the information in this manual:

•

For more information about the FlexRay protocol, refer to the following document:

— FlexRay Communications System Protocol Specification V2.1A

— FlexRay Communications System Electrical Physical Layer Specification V2.1A

•

For more information about M9HCS12, MPC5xx and MPC55xx Family devices and how to 
program them, refer to the Freescale Products section at 

www.freescale.com

.

Summary of Contents for FlexRay MFR4310













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands