Freefly Alta 8 Pro, Manual

Page: 81 / 128

Tuning can change the fundamental flying characteristics of ALTA Pro. It is
possible for ALTA Pro to become unstable or even uncontrollable if values are
set too high or too low. Only change tuning parameters in small increments and
with caution. Always test new tuning configurations in open areas away from
people or obstacles.
While ALTA Pro QGroundControl allows users to tune their ALTA Pro in the
air we suggest changing tuning values while ALTA Pro is on the ground as a
precautionary measure.
When making configuration changes with ALTA Pro QGroundControl, make
sure to save each parameter as you change them!
****
Additional Parameters
Additional Parameters
ALTA Pro QGroundControl allows users to alter many additional parameters that do not
affect the Flight Controller characteristics of ALTA Pro. These parameters are used to select
neutral points using trim or to set maximum or minimum values for a variety of different
settings. These settings can be found under the Tuning and Parameters tabs in the Vehicle
Setup menu.
Users should understand the effect of parameter settings before changing
them. Incorrect or poorly chosen parameters can result in crashes, injury, or
death. You can always reset all parameters to defaults by following the
Reset to Default instructions.