Freefly Alta 8 Pro, Manual

Page: 43 / 128

ALTA Pro can power a variety of first person view (FPV) cameras and transmitters, as well
as add informational on-screen display (OSD) elements to aid in FPV flying. Using an FPV
ground station display can be a useful method of monitoring status, performance, and flight
parameters of the ALTA Pro during flight.
Three FPV transmitter cables are included with each ALTA Pro. Each supplied cable has one
side with a connector that mates with a cable located in the closeout panel between booms
1 & 2. The other end of each supplied cable has specialty connector(s) to run Immersion RC,
Fatshark, BOSCAM, or BOSCAM compact FPV transmitters. For cable identification, refer
to the FPV Transmitter installation instructions.
A single camera cable is provided and is configured to run a Ready Made RC camera (model
RMRC-700XVN recommended). This cable mates with a pre-installed cable located behind
the closeout panel between booms 1 & 8.
Camera and transmitter cables follow this wiring scheme:
Cable Color Function
Red +12 VDC
Black Ground
Yellow Video signal
It is the responsibility of the pilot to see and avoid other aircraft, people, or
obstacles. Always maintain direct line of sight with ALTA Pro during flight, use
visual observers as operations require, and follow local regulations regarding
see-and-avoid requirements.