Freefly Alta 8 Pro, Manual

Page: 57 / 128

Make sure to reset all trims and subtrims to zero before
continuing with calibrating and mapping your radio.
Set the transmitter mode radio button that matches your radio configuration (this
ensures that QGroundControl displays the correct stick positions for you to follow
during calibration).
Move the sticks to the positions indicated in the text (and on the radio image). Press
Next when the sticks are in position. Repeat for all positions.
When prompted, move all other switches and dials through their full range (you will be
able to observe them moving on the Channel Monitor).
Press Next to save the settings.
Mapping Channels Using ALTA Pro QGroundControl App
Radio channel mapping is accomplished with the Alta Pro Qgroundcontrol App. Prior to
mapping channels, ensure your radio controller and receivers are properly installed and
calibrated. Refer to the Radio Installation section of this manual and your radio controller’s
documentation.
Power the ALTA Pro by plugging in a USB-C cable to the expansion port. The expansion
port is located under the closeout between booms 1 and 2
Once connected, the ALTA electronics will be powered and you may turn on the
transmitter.
Open the ALTA QGroundControl program, navigate to the Flight Mode tab in the
Vehicle Setup menu for access to the channel mapping.
Channel mapping can be customized by the user on this menu to fit their preferences.
Below is a quick description of the items mapped to the transmitter and suggested
channels for each mapped item.