Compass Calibration
Follow the instructions below to perform a compass calibration on ALTA Pro. Compass
calibrations should be done when flying in a new location or when ALTA Pro QGroundControl
prompts a calibration.
1. Click the Compass sensor button.
2. Click OK to start the calibration.
3. Place the vehicle in any of the orientations shown in red (incomplete) and hold it still.
Once prompted (the orientation-image turns yellow), rotate the vehicle around the
specified axis in either/both directions. Once the calibration is complete in that
orientation the associated image on the screen will turn green.
4. Repeat the calibration process for all vehicle orientations.
Summary of Contents for Alta 8 Pro
