Freefly Alta 8 Pro, Manual

Page: 100 / 128

Item Action
3. Boom retention clips STOW
4. Booms UNFOLD
5. Boom latches LOCK
6. Receivers and wiring CHECK
7. Isolator cartridges SELECT and INSTALL as necessary
8. Payload mounting location CONFIGURE as necessary
To set up ALTA Pro for flight, remove it from the case, and remove the prop protectors.
Stow the boom retention clips by folding them down. The clips fold in one direction and are
spring-loaded to stay in open and closed detented positions.
Unfolding the booms is most easily accomplished by unfolding all opposite pairs partially,
then unfold the opposite boom pairs completely. ALTA Pro can become unbalanced while
unfolding booms individually, so unfolding opposite pairs reduces the possibility of tipping.
Once unfolded, push on the boom latches until they audibly click, indicating the booms are
secure. There should be little to no slop in the hinge. Check that the receivers and the
electrical connectors that attach to the receivers are secure.
For information on installing isolator cartridges and setting up payload mounting locations,
refer to the Isolator Cartridges and Configuring GroundView or SkyView sections of this
manual.
Before Starting
Item Action
1. Payload SECURED
2. Isolator Cartridges VERIFY SECURE
3. Propellers CHECK CONDITION, VERIFY TIGHT
4. Propeller Hubs VERIFY SECURE
5. Motors CHECK CONDITION