97
GB
5
File systems
The attached USB device has use in a file system format supported by the FSG. The
supported file systems are:
FAT32
NTFS (read-only access)
ext2
ext3
reiserfs
HFS(+) (read-only access)
Note: To obtain full access to the external drive, we recommend that you
use FAT32 when formatting the drive.
5.6.2 eSATA
Connection
To install a S-ATA external storage device, you must first shutdown the FSG. Go to the
web interface and log in to the administration site. Go to the shutdown item of the
Hardware menu and press shutdown. Wait till the FSG is shutdown and plug in the eS-
ATA connector of the external device into the FSG eS-ATA port. Make sure the eS-ATA
device is powered on and turn the FSG back on. The storage on the eS-ATA device should
show up as a shared folder. This shared folder can be reached via FTP, HTML and SMB
(Windows file sharing). The folder will be mounted with read and write rights for all in the
root folder (/).
Filesystems
An attached S-ATA Disk must be formatted in a file system supported by the FSG. The
supported file systems are:
FAT32
NTFS (read-only)
ext2
ext3
reiserfs
HFS(+) (read-only)
Remark: To have read/write access on the external disk, we recommend
formatting the disk in FAT32 format.
Connecting External Drivers (USB, SATA)
