Frecon FR500F Series, Manual

Page: 22 / 50

FR500F Series Special Purpose Inverter
- 22 -
F05.06 R1 output delay time 0.0
～
6000.0s 0.0s △
F05.07 R2 output delay time 0.0
～
6000.0s 0.0s △
F05.08
Enabled state of digital
output
Unit's place: Y1
0000 ×
0: Positive logic
1: Negative logic
Ten’s place: Y2 (same as unit's
place)
Hundred’s place: Relay 1 output
(same as unit's place)
Thousands place: Relay 2 output
(same as unit's place)
F05.09
Detection width of
frequency attained
0.00
～
20.00Hz 5.00Hz ×
F05.10 FDT1 upper bound 0.00
～
Fmax 30.00Hz ×
F05.11 FDT1 lower bound
0.00 ～ Fmax
30.00Hz ×
F05.12 FDT2 upper bound 0.00
～
Fmax 30.00Hz ×
F05.13 FDT2 lower bound 0.00
～
Fmax 30.00Hz ×
F05.14
Consecutive running
time
0.0 ～ 6000.0Min 0.0:Disabled
0.0Min ×
F05.15
Accumulative power-on
time setting
0 ～ 65535h 0:Disabled 0h ×
F05.16
Accumulative running
time setting
0 ～ 65535h 0:Disabled
0h ×
F05.17 Brake control selection
0: Disabled
0 ×
1: Enabled
F05.18 Brake opened frequency Closed frequency ~30.00Hz 2.50Hz ×
F05.19 Brake opened current 0.0~200.0% 0.0%
△
F05.20 Brake open waiting time 0.00~10.00s 0.00s ×
F05.21 Brake open operating time 0.00~10.00s 0.50s ×
F05.22 Brake closed frequency 0.00Hz~opened frequency 2.00Hz ×
F05.23 Brake close waiting time 0.00~10.00s 0.00s ×
F05.24 Brake close operating time 0.00~10.00s 0.00s ×
Group F06 Analog and Pulse Input
F06.00
Minimum input of curve
AI1
0.0% ～ input of inflection point1
of curve AI1
1.0%
△
F06.01
Set value corresponding
to minimum input of
curve AI1
-100.0
～
100.0% 0.0%
△
F06.02
Input of inflection point
1 of curve AI1
Minimum input of curve AI1 ～ Input
of inflection point 2 of curve AI1
25.0%
△
F06.03
Set value corresponding
to input of inflection
point 1 of curve AI1
-100.0 ～ 100.0% 25.0%
△
F06.04
Input of inflection point
2 of curve AI1
Input of inflection point 1 of curve
AI1
～
Maximum input of curve AI1
75.0%
△
F06.05
Set value corresponding
to input of inflection
point 2 of curve AI1
-100.0 ～ 100.0% 75.0%
△
F06.06
Maximum input of curve
AI1
Input of inflection point 2 of curve
AI1
～
100.0%
100.0% △
F06.07
Set value corresponding
to maximum input of
curve AI1
-100.0 ～ 100.0%
100.0% △
F06.08
Minimum input of curve
AI2 0.0%
～
input of inflection point1 of
curve AI2
1.0% △