FR500F Series Special Purpose Inverter
- 21 -
control
1: Holding
Ten’s place: action on power loss
0: Clear
1: Holding
Hundreds place: integral function
0: No integral function
1: Integral function enabled
F04.17
Terminal UP/DOWN
frequency change step
size
0.00
～
50.00Hz 0.00:Disabled
1.00Hz/
200ms
△
F04.18
Terminal action selection
when power on
0:Level effective
0
×
1:Edge tLevel effective
F04.19
Delay time before terminal
DI1 is invalid
0.0
～
300.0s
0.0s
△
F04.20
Delay time before terminal
DI2 is invalid
0.0
～
300.0s
0.0s
△
Group F05 Digital Output
F05.00
Y1 output function
0: No output
1: Drive is running
2: Fault output
3: Frequency-level detection FDT1
output
4: Frequency-level detection FDT2
output
5: Drive in 0Hz running 1(no output
at stop)
6: Drive in 0Hz running 2(output at
stop)
7: Upper limit frequency attained
8: Lower limit frequency attained
9: Frequency attained
10: Inverter is ready to work
11: Drive (motor) overloaded alarm
12: Inverter overheat warning
13: Current running time attained
14: Accumulative power-on time
attained
15: Consecutive running time
attained
16: PLC cycle completed
17: Set count value attained
18: Designated count value
attained
19: Length attained
20: Under load alarm
21:Brake output
22: DI1
23: DI2
24:When reach the range of set
frequency(FDT1)
26: PID feedback lost
27: operation status (inching
without output)
28: communication setting
(address 2007h)
1
×
F05.01
Y2 output function
3
F05.02
Relay 1 output function
2
×
F05.03
Relay 2 output function
11
×
F05.04
Y1 output delay time
0.0
～
6000.0s
0.0s
△
F05.05
Y2 output delay time
0.0
～
6000.0s
0.0s
△
