Frecon FR200F Series, User Manual

Page: 19 / 49

FR200F series Special Purpose Inverter
- 19 -
acceleration of S curve
F03.13
Frequency switchover
point
between acceleration time
1
and acceleration time 2
0.00 ～ Fmax 0.00Hz ×
F03.14
Frequency switchover
point
between deceleration time
1
and deceleration time 2
0.00
～
Fmax 0.00Hz ×
F03.15
End segment time of
acceleration of S curve
0.0
～
6000.0s 0.0s ×
F03.16
Initial segment time of
deceleration of S curve
0.0 ～ 6000.0s 0.0s ×
F03.17
End segment time of
deceleration of S curve
0.0 ～ 6000.0s
0.0s ×
Group F04 Digital Input
F04.00 Function of terminal DI1 0: No function 1 ×
F04.01 Function of terminal DI2 1: Running forward (FWD) 2 ×
F04.02 Function of terminal DI3 2: Running reverse (REV) 7 ×
F04.03 Function of terminal DI4 3: Three-wire control 13 ×
F04.04 Function of terminal DI5 4: JOG forward 0 ×
F04.05 Function of terminal DI6 5: JOG reverse 0 ×
F04.06 Function of terminal DI7 6: Coast to stop 0 ×
F04.07 Function of terminal AI1 7: Fault reset (RESET) 0 ×
F04.08 Function of terminal AI2 8: Running suspended 0 ×
F04.09 Function of terminal AI3
9: External fault input
0 ×
10: Terminal UP
11: Terminal DOWN
12: UP/DOWN (including
∧
/
∨
key) adjustment clear
13: Multi-step frequency terminal 1
14: Multi-step frequency terminal 2
15: Multi-step frequency terminal 3
16: Multi-step frequency terminal 4
17: Accel/Decel time determinant 1
18: Accel/Decel time determinant 1
19: Accel/Decel disabled(ramp
stop not inclusive)
20: Switch to auxiliary speed
setting
21: PLC status reset
22: Simple PLC paused
23: Simple PLC paused
24: PID adjustment direction
25: PID integration paused
26: PID parameter switch
27: Swing frequency pause(output
the currentfrequency)
28: Swing frequency reset(output
the central frequency)
29: Run command switched to
keypad contro
30: Run command switched to
terminal control