Franklin Electric 5870205003C, Owner'S Manual

Page: 27 / 136

SubDrive/MonoDrive Connect
27
Auxiliary Input
The AUX IN terminal supports a dry-contact 24 VDC digital input to control the
SubDrive/MonoDrive unit. This terminal can be wired using the internal 24 VDC
supply or an external 24 VDC supply. When using an external 24 VDC supply,
the signal common of the external supply must be connected to the AUX INPUT (-)
terminal of the SubDrive/MonoDrive controller.
(+): 24 VDC switched input (-): Signal Common for 24 VDC signal
Internal 24 VDC Supply
External 24 VDC Supply
Refer to the Advanced Setup section for more information about configuring this input.
WET SENSOR
(+24)
-OR-
TRANSDUCER
(+24)
AUX INPUT
(+)
AUX INPUT
(+)
AUX INPUT
(-)