SubDrive/MonoDrive Connect
23
Installation Procedure
Drive Mounting
The SubDrive/MonoDrive unit should be mounted on a surface or backplate no smaller
than the outer controller dimensions in order to maintain the NEMA 3R rating. The controller
must be mounted at least 18" (45.7 cm) off the ground.
The controller is mounted using the hanging tab on the top side of the enclosure, as
well as two (2) additional mounting holes on the back side of the controller. All three (3)
screw hole locations should be used to ensure the controller is securely mounted to the
backplate or wall.
"B"
"A"
"C"
"D"
133,9
[5.27]
250,5
[9.86]
"E"
MODEL
“A”
“B”
“C”
“D”
“E”
SubDrive15,
MonoDrive
464.2
[18.28]
355.2
[13.98]
454.7
[17.90]
427.4
[16.83]
157.4
[6.19]
SubDrive20,
SubDrive30,
MonoDriveXT
539.4
[21.24]
430.4
[16.94]
529.9
[20.86]
502.6
[19.79]
157.4
[6.19]
SubDrive50
539.4
[21.24]
430.4
[16.94]
529.9
[20.86]
416.2
[16.39]
168.4
[6.63]
11
[0.43]
53,2
[2.09]
53,9
[2.12]
140
[5.51]
2X 7,7
[0.31]
Summary of Contents for 5870205003C
