EN
6
6
INSTALLATION
This Hood is set up to be fitted inside the kitchen unit in:
•
Ducting version
:
Evacuation to the outside.
•
Recirculation version
: Internal
recirculation.
Sequence of operations - Installation
• Drilling the Support Surface and Fitting the Hood
• Connections
• Functional Check
• Disposal of Packaging
Drilling the Support Surface
X
812
Warning
Once the Support surface has been drilled the Hood Canopy can be installed in two ways:
• By inserting the Hood Canopy from below (
X
= 106 mm ).
• By inserting the Hood Canopy from above (
X
= 113 mm ).
IMPORTANT
The minimum distance between the opening for the hob and the one for the hood must be of at
least 3-5 cm according to the strength of the material used for the working top.