DE
6
62
A
Montage der Motoreinheit
• Je nach Vorbereitung des Küchenmöbels kann die Motoreinheit (
1
)
an der Front- oder der Rückseite montiert werden, wobei die korrekte
Position des Deckels zu kontrollieren ist.
• Danach kann die Motoreinheit entsprechend der Position der Ab-
luftöffnung am Möbel um jeweils 90° gedreht werden, so dass der
Luftauslass an allen 4 Seiten auf Höhe der Öffnung am Möbel (
2
)
ermöglicht wird.
• Die Motoreinheit durch Ausschrauben der bei-
den Schrauben (
A
) von der Halterung lösen.
• Den aus dem Haubenkörper austretenden Verbinder mit
dem Anschluss der Motoreinheit verbinden.
• Die Motoreinheit durch Einschrauben der beiden zuvor ausgebau-
ten Schrauben wieder an der Halterung befestigen.
• Danach die Motoreinheit mit den mitge-
lieferten Schrauben
12a
und
12b
wie ab-
gebildet am Haubenkörper anschrauben.