FR
4
40
INSTALLATION
Cette hotte est prévue pour être installée à l’intérieur du meuble de cuisine en :
•
Version aspirante :
évacuation à l’extérieur.
•
Version filtrante :
recirculation
intérieure.
Séquence des opérations d’installation
• Perçage du plan de support et montage de la hotte
• Connexions
• Contrôle fonctionnel
• Élimination des emballages
Perçage du plan de support
X
812
Attention
Après avoir percé le plan de support, le corps de hotte pourra être installé de deux manières :
• Enfiler le corps de hotte en passant par le bas (
X
= 106 mm ).
• Enfiler le corps de hotte en passant par le haut (
X
= 113 mm ).
Important
La distance minimale entre l'ouverture de la plaque de cuisson et l'autre pour le capot doit être
d'au moins
3-5 cm
par rapport à la résistance du matériau utilisé pour le plan de travail.