EN
1
16
USE
Control panel
Button Function
LED
button
A
The button only works when the door is open.
Press Briefly = Turns the
Lights
On/Off at maximum
intensity.
Press and hold for 2 Seconds = Turns the
Courtesy lights
On/Off.
B
Door Open or Closed
Press briefly = performs a
Reset
of the Filter saturation
alarm.
After 100 hours in operation the
Drop
symbol is
displayed to indicate saturation of the Metal Grease
Filters.
After 200 hours in operation the letter
C
is displayed to
indicate saturation of the Activated Charcoal filters.
Door Open or Closed
Press and hold for 2 Seconds = Enables/Disables the
Activated Charcoal Filter Alarm
with the Motor turned
off and no Filter Alarm triggered.
Symbol
C
flashes twice = A.C. Filter Alarm Activated
Symbol
C
flashes once = A.C. Filter Alarm Deactivated
C
Door Open.
Press briefly = Activates/Deactivates
Delay
mode,
causing automatic shutdown of the Motor and the
Lighting system from any speed with a 30’ delay. It is
disabled by pressing the same button again, turning the
motor off or closing the door.
Displays the
Clock
symbol.
Works both with Door Closed and Open with Motor +
Lights = Off.
Press and hold for 4 Seconds = Enables/disables the
Keyboard Lock
.
All the LED buttons flash twice. During the Lock the LED
buttons light up in sequence.
D
Only works with the Door Open.
Press briefly = Enables/Disables the
Intensive
speed. This
speed is timed to run for 10 minutes. At the end of this
time the system will return to the speed set previously.
It is disabled by pressing the same button again, turning
the motor off or closing the door.
Displays the
I
symbol.
E
Only works with the Door Open = increases the working
speed.
The number of lighted segments increases.
F
Only works with the Door Open = decreases the working
speed.
The number of lighted segments decreases.
G
Only works with the Door Open.
Press briefly =
Turns the Motor off
LEDs turn off
Door Open or Closed
Press and hold for 2 Seconds with Motor and Lights Off =
Enables/Disables the
Remote control
.
LED keys flash twice = Remote control Enabled
LED keys flash once = Remote control Disabled
H
Door Open =
Closes the Door
+ Lights and Motor Off
(*)
Door Closed =
Opens the Door
+ Lights and Motor On.
Warning
: If the Door remains partially open for any
reason, press the Button to complete the opening or
closing cycle.
(*) While the Door is Closing it will block in an
intermediate position after approximately 6 seconds. To
finish Closing you must press the button again and hold it
until the door is completely closed.