Franke FCE90M10B, User Manual

Page: 9 / 15

The turnspit (only available on certain models)
To start the turnspit, proceed as follows:
·
Insert the rotisserie rod
“A”
into the drive unit and groove
“B”
into bend
“C”
;
· Turn the plastiv handle
“D”
anti clockwise and slide the rack into the oven runners ensuring that the rod
“E”
slots
into the hole
“F”
;
· The rotisserie rack must always be fitted in the middle of the oven (second position from bottom);
· Press the Oven function selection or to select setting
.
Cooling ventilation
In order to cool down the exterior of the appliance, this model is equipped with a cooling fan, which comes on
automatically when the oven is hot.
When the fan is on, a normal flow of air can be heard exiting between the oven door and the control panel.
Note: When cooking is done, the fan stays on until the oven cools down sufficiently.
How to Keep Your Oven in Shape
Before cleaning your oven, or performing maintenance, disconnect it from the power supply.
To extend the life of your oven, it must be cleaned frequently, keeping in mind that:
· the enameled or stainless steel parts should be washed with lukewarm water without using any abrasive powders
or corrosive substances which could ruin them ;Stainless steel could get stained .If these stains are difficult to
remove, use special products available on the market. After cleaning, it is advisable to rinse thoroughly and dry.
·
the inside of the oven should preferably be cleaned immediately after use ,when it is still warm ,with hot water
and soap ;The soap should be rinsed away and the interior dried thoroughly. Avoid using abrasive detergents (for
example cleaning powders, etc) and abrasive sponges for dishes or acids (such as lime scale
–remover, etc…) as
these could damage the enamel .If the grease spots and dirt are particularly tough to remove, use a special product
for oven cleaning, following the instructions provided on the packet. Never use a steam cleaner for cleaning inside of
oven.
·
if you use your oven for an extended period of time ,condensation may form .Dry it using a soft cloth.
· there is a rubber seal surrounding the oven opening which guarantees its perfect functioning .Check the condition
of this seal on a regular basis .If necessary, clean it and avoid using abrasive products or objects to do so. Should it
become damaged, please contact you’re nearest After-sales Service Center .We recommend you avoid using the
oven until it has been repaired.
·
never line the oven bottom with aluminum foil ,as the consequent accumulation of heat could compromise the
cooking and even damage the enamel .
·
clean the glass door using non-abrasive products or sponges and dry it with a soft cloth .
How to Remove The Oven door
For a more thorough clean, you can remove the oven door. Proceed as follows:
·
Open the door fully;
F
E
A
C
B
D