- 11 -
ZMI
_001_
2030
0366
54-A
C
EX90
05_#
SEN_#
AQU_V
1
.f
m
12. System Setting
The following parameters are set in System Setting:
– Language
Language of the display.
– Standby Mode
The display switches off after the pre-set time when the Standby Mode is
activated. The Reader goes into Standby Mode.
Press the “
” button to exit the Standby Mode.
– Standby Time
Time after which the display switches off.
– Key Beep
Each keypress generates a noise when Key Beep is activated.
The other parameters cannot be changed.
Select the following menu items to go to the destination display:
12.1
Select parameters with “
” buttons.
12.2
Set parameters with “
” buttons.
12.3
Confirm with “
OK
” button.
• The settings are stored.
☞
Important!
Energy is saved when the Standby Mode is activated.
Reader Settings
System Setting
14-Jan-2018 16:03
Language:
Standby Time:
Key Beep:
Voltage:
Firmware Ver:
German
0.5m
Yes
3.6V
01.00.07
Standby Mode:
Yes
Build Date:
Aug 8 2017
Build Time:
16:39:56
