- 7 -
ZMI
_001_
2030
0366
54-A
C
EX90
05_#
SEN_#
AQU_V
1
.f
m
8.
Operation
The sensor functions differ depending on their application cases. There are different
executable sensor functions for each tap. The Reader automatically identifies the
right tap family. Operation is described on the basis of a Standard Tap in these
instructions for ease of understanding. The menu navigation is identical for each
type of Franke tap. Only the scope of the lowest menu levels differs.
The Reader sends signals via the opto-electronic
interface. The sensor of the tap and the opto-
electronic interface of the Reader require visual
contact with a minimum distance of at least 50 mm
and a maximum distance of 250 mm to make settings.
☞
Important!
The sensor must be activated before using the Reader (move your hand towards the
sensor).
The Reader is controlled via the following buttons:
– The “
OK
” button opens a menu item and confirms changes, whereby the menu
item is exited at the same time.
– The “
” buttons are used to navigate through the menu items.
– The “
” button is used to navigate to the previous menu level.
– The “
” buttons are used for navigation or setting parameters.
– The “
” button is used to send settings/parameters to the tap.
– The “
” button is used to receive pre-set parameters/statistical data from
the tap.
– The “
” button switches the Reader to Standby Mode or from Standby Mode.
☞
A selected line or field is highlighted in yellow.
If an action has been successfully sent to the tap,
it is displayed with the following icon:
If an action has not been successfully sent,
it is displayed with the following icon:
> 50 mm
< 250 mm
