service manual
FPI 5000 I
510
.03-38
rev. 01.0 - 01/2002
figure 3.14: The menu
VERTICAL SYSTEM
.
3.3.1
The FOLDER OFFSET menu
In the FPI 5000 C the folding process is implemented by the timing of two cam discs, one for each folding
position, rather than by the use of mechanical folding stops. The timing is determined by the document length
of the sheets to be folded. Given these tolerances in the activation times of the clutches involved, the service
software provides for an equivalent shift in the folding positions, thus compensating a clutch activation time
that deviates from the average value.
In the FOLDER OFFSET menu of
figure 3.15
you first select the folder. Than you can set the equivalent shift
in the folding position between -20 mm and +20 mm. By processing test material you can decide if subsequent
corrections in these settings are necessary.
figure 3.15: The FOLDER OFFSET menu.
3.3.2
The
FV CONFIG. SETTINGS
menu
The presence of the divert unit, the feeder unit(s) and the DFC units is recorded in non-volatile FRAM on the
FRAM board 95.74.55 of the FPI 5000 I. The FRAM is automatically updated if a component has been added,
but will not be automatically updated if a component appears to be deleted. (The jumper settings on the feeder
board(s) 93.08.02) are not stored in FRAM, but read at the start of each machine session). The system settings
menu of
figure 3.16
shows the configuration as based on the FRAM settings. If you delete a component, the
machine issues an error during the next startup. The error message is related to the deleted item. If a component
has been accidentally deleted (during certain service actions of the machine), the error message suggests you
to mechanically and electronically restore this component and restart the machine. However, if a component
is intentionally deleted, the machine configuration must be updated, i.e. the deleted component(s) must be
Key
1
2
3
4
5
6
Summary of Contents for FPI 5000 C
