Francotyp-Postalia FPI 5000 C, Service Manual

Page: 141 / 249

service manual FPI 5000 I
510 .03-32
rev. 01.0 - 01/2002
3.2 The INSERTER service software
The menu consists of six submenus, as shown in figure 3.5 . The submenus are:
• Sensors ( figure 3.6 )
• DFC ( figure 3.9 )
• Actuators ( figure 3.10 )
• Display ( figure 3.11 )
• Keyboard ( figure 3.12 )
• Reset Data ( figure 3.13 )
figure 3.5: The INSERTER service menu.
3.2.1 The menu SENSORS
This menu (see figure 3.6 ) consists of the following menus:
• Photocell condition ( figure 3.7 );
• Digital inputs ( figure 3.8 ).
figure 3.6: The menu SENSORS.
Photocell condition
In the FPI 5000 I and FPI 5000 C so-called intelligent photocells are used. This implies that within a certain
control range the currents of the photocell transmitters are adjusted in such a way that the no-paper output
voltage of the photocell receiver falls within a certain voltage range of the photocell receiver. In this way fair
amounts of dust present on the photocell sensors are compensated for. The control mechanism ensures that
very reliable paper/no paper decisions are being made, based on the paper photocell condition.
The screen of
figure 3.7 provides real time information on the various paper photocells. In this screen you also
can see whether the relevant photocell "sees" paper.
The various photocells can be readjusted by pressing the Clear key. The photocell adjustments are also
automatically performed during each startup of the FPI 5000 I/FPI 5000 C machines.
Key
1
2
3
4
5
6
Key
1
2
3
4
5
6