manualshive.com logo in svg

frako EML 1101, Manual

Share
Download
frako EML 1101 Manual Download Page 39

User Manual EML1101 

 

Annex 

 Progress   Data 

transfer 

     

 15% 

   

Stop 

The display does not change on the EML during the update. The LCD display does not change until 
the data has been copied into the FLASH EPROM: 

 

Please wait... 

The EML is ready when the normal power display is shown. 
 
After the EML is initialised the settings and historical data are automatically written back to the EML. 
The end of this process is confirmed by the following message: 

 

The EML is now ready! 
Click OK to conclude the update! 
OK 

 
Program update error. 
Check if the FRAKO bus is disconnected and that the instrument is switched on. Should one of these 
be the case remedy it and restart the update. 
Upgrade

 

to 

 

or 

 

An upgrade to a higher FRAKO system option can only be carried out with EML software version 1.70 
or higher. If this is not the case a software update is necessary.  
The upgrade is started over the same menu item (Settings/EML software update) as a software 
update. The activation code tells OPT-SW to which version or system option the EML is to be 
updated/upgraded.  
No data is lost in the case of an upgrade to a higher FRAKO system option. 

 

 

39 

Summary of Contents for EML 1101



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands