User Manual EML1101
Printer routines
9.7 Power
maxima
of the last 50 days
Maximum demand values for the previous 50 days is printed out. In this printout are no indications of
highest values. The times of the day's maximum values are only given by the printer when
OPT-SW
configuration software is used.
------------------MAXIMUM POWER VALUES FOR THE LAST 50 DAYS-------------------------
0% 50% 100% => Pset
DO 14.02.¦===============¦======== ¦ 470kW, at 09:45 for P1=600kW
Fr 15.02.¦===============¦========== ¦ 502kW, at 10:00 for P1=600kW
Sa 16.02.¦===============¦== ¦ 170kW, at 11:30 for P2=300kW
So 17.02.¦============== ¦ ¦ 142kW, at 10:00 for P2=300kW
Mo 18.02.¦============== ¦===============¦+ 602kW, at 11:30 for P1=600kW
Tu 19.02.¦============== ¦============== ¦ 578kW, at 11:00 for P1=600kW
Do 20.02.¦===============¦============== ¦ 582kW, at 13:15 for P1=600kW
.
.
.
Do 03.04.¦===============¦============== ¦ 581kW, at 11:15 for P1=600kW
Printout from Friday, 04.04.99
9.8 Power maxima of the last 48 months
The month's maximum values for the past 48 months is printed out here.
-------------------MAXIMUM POWER FOR THE PAST 48 months-----------------------
0% 50% 100% => Pset
13 May 99¦===============¦======== ¦ 470kW, at 09:45 for P1=600kW
28 Jun 99¦===============¦========== ¦ 502kW, at 10:00 for P1=600kW
31 Jul 99¦===============¦== ¦ 170kW, at 11:30 for P2=300kW
07 Aug 99¦============== ¦ ¦ 142kW, at 10:00 for P2=300kW
02 Sep 99¦============== ¦===============¦>+ 602kW, at 11:30 for P1=600kW
30 Oct 99¦============== ¦============== ¦ 578kW, at 11:00 for P1=600kW
18 Nov 99¦===============¦============== ¦ 582kW, at 13:15 for P1=600kW
.
.
.
02 Jun 98¦===============¦============== ¦ 581kW, at 11:15 for P1=600kW
Printout for Friday, 04.12.99
9.9 Event
list
All events are stored here with date and time. Example:
---------------------------EVENT LIST---------------------------------
17.03.99, 16.45.30 :
Time pulse detected
!
17.03.99, 17.00.00 :
No time pulse
!
18.03.99, 09.37.34 :
Target
power excess ended!
18.03.99, 09.40.20 :
Target
power exceeded!
Event Event
release
Target power exceeded!
Target power excess ended!
Peak power exceeded!
Peak power excess ended!
Cos(phi) outside lower range!
Cos(phi) outside lower range ended!
Emergency mode activated!
Emergency mode deactivated
Target power adjusted!
No message
Target power reset per contact!
No message
Target power reset per deadline!
No message
Target power over limit!
No message
Target power changed via FRAKO bus!
No message
Target power changed via keyboard!
No message
Add-on bus error!
Add-on bus error ended!
No time pulse !
Time pulse detected
Time pulse before end of measuring period!
No message
No pulse at input 1!
Pulse at input 1 detected!
No pulse at input 2!
Pulse at input 2 detected!
No pulse at input 3!
Pulse at input 3 detected!
Counter reset
No message
Power supply failure!
Power supply switched on again
Reset carried out
No message
External synchronization carried out
Time pulse after external synchronization
Work counter reset
No message
Time set by master XX !
No message
Time set by user!
No message
Error in clock module!
Clock module operating correctly!
Error writing to EEPROM!
No message
25
