Foxconn T99B226, Manual

Page: 20 / 37

If the configuration page cannot be accessed, contact your computer’s network administrator to
check the IP address of your computer. If you still cannot open the management page correctly,
please contact a technician of Foxconn Industrial Internet incorporated company.
Figure 3.2 Configuration Overview
3.2 Basic Setting
The Small Cell contains one 10/100mbps Ethernet interface. The factory default setting is
DHCP. The Ethernet port should be configured according to the actual requirements when used
for the first time. Click “Basic Setting” → “WAN Configuration” to enter the gateway network
configuration and WAN Configuration.
➢
WAN Configuration
The WAN mode includes two modes – DHCP and static IP. The specific functions of each
mode are explained below:
1
）
DHCP: The Small Cell will automatically receive the IP address from the superior route,
contact your IT administrator to get this address. Note: the IP address will be
automatically changed each time the gateway is restarted in this mode.
Figure 3.3 WAN configuration is set to DHCP