with this HeNB through NL sync mode.
4) free running sync mode
If you do not have any sync source (GPS/PTP/NL) in your environment, you can use
the free running sync mode to test HeNB
3.4.6 HeNB Running Mode _ SAS
Enable the SAS in your small cell.
Figure 3.11 HeNB Running Mode
3.5 Firmware Upgrade
Using File Transfer Protocol (FTP) to perform the firmware upgrade on the small cell.
Navigate to Firmware Upgrade, then specify the Protocol used to do the firmware upgrade, the
FTP server IP address, the Username and Password for the FTP server, and the File name of
the firmware.
Figure 3.12 Firmware Upgrade Configuration
Summary of Contents for T99B226
