Foxconn T99B226, Manual

Page: 22 / 37

3.4 Cell Configuration
1)
Cell Identity – unique identifier to identify the Small Cell. This Value cannot be assigned
to another small cell in the same network.
2)
TxPowerMax – Maximum power level of the small cell. Sets the LTE max coverage
radius.
3)
TxPowerMin – Minimum power level of the small cell. Sets the minimum LTE coverage
radius.
4)
DL_EARFCN_List – Specifies the downlink Radio Frequency Channel Number for two
RF card. In this use case, you are using Band 48. This means that the frequency range
is from 3550MHz~3700MHz. It is important to note that setting multiple small cells within
the range of each other to the same frequency will cause interference.
5)
UL_EARFCN_List – Specifies the uplink Radio Frequency Channel Number for the two
RF cards.
6)
ULDLMode – Indicates the TDD subframe configuration. The supported values are
mode 1 and mode 2. Mode 1 will obtain higher uplink bandwidth and lower downlink
bandwidth.
Figure 3.6 Small Cell radiation Overlap
3.4.1 Rem Configuration
This is the algorithm used for handover function. Select the band to listen to macro cell for