Four Winds V475 Owner'S Manual Download

Page: 156 / 189

Owner’s Manual Page 154

General Maintenance - Section R

10. Clean the boat interior thoroughly. Vacuum

carpets, and dry clean drapes and upholstery

jackets as necessary.

11. Wash exterior fiber glass components, wax lightly.

12. Clean exterior upholstery with hand dish washing

soap and water, rinse, and dry thoroughly.

13. Remove all oxidation from exterior hardware and

apply a light film of moisture - displacing lubricant.

C. Prior to Winter Storage

1. Remove as many cushions as possible. Re move

storage lids or hatches. Open as many locker

doors, as possible. Open the refrigerator door.

Leave these areas open to improve ventilation.

2. Spray the weather covers and the boat uphol stery

with Lysol Spray Disinfectant™. En closed areas

such as the refrigerator, shower basin, storage

locker areas, etc. should also be sprayed with

Lysol Disinfectant™.

3. Place small dishes of rodent poison such as

D-Con™ in a number of areas around the boat. Be

sure dishes are placed near the head and the

engines, as rodents will destroy uphol stery, water

intake and discharge hoses.

4. If the boat will be in outside storage, properly

support a storage cover and secure it over the

boat. DO NOT secure the cover tightly to the boat.

This does not allow adequate ventilation and can

lead to dry rot. DO NOT store the boat in a damp

storage enclosure. Excessive dampness can

cause electrical problems, corrosion, and dry rot.

Placing an electric or fuel burning heating unit

in the bilge of the boat during cold weather

could cause fire or explosion and is not

recommended.

5. DO NOT use the canvas top and canvas curtains

as a winter storage cover. The life of these covers

may be signifi cantly shortened if ex posed to harsh

weather elements for long periods.

NOTICE

Boats stored outside in areas with heavy snow

accumulation are more susceptible to damage,

and should be inspected regularly during the

winter months.

Summary of Contents for V475






























































































































































































Search results

Summary of Contents for V475

Reviews:

Related manuals for V475

Brands by name

Popular brands

Four Winds V475, Owner'S Manual

Search results

Summary of Contents for V475

Reviews:

Related manuals for V475

Brands by name

Popular brands