manualshive.com logo in svg

Four Winds V475, Owner'S Manual

Share
Download
Four Winds V475 Owner'S Manual Download Page 132

Owner’s Manual Page 130

Upholstery - Section N

Figure N11: Storage Beneath Cushions

Figure N12: Workstation/Desk 

Figure N13: Cedar Lined Hanging Locker

Figure N14: Head w/Shower

To pre vent per son al inju ry, be sure the mid 

cab in fill-in supports are se cure be fore use.

N - 2  EXTERIOR FURNISHINGS

A.   Helm Seat

The helm seat is double wide so it can seat two 

people comfortably. The driver's portion of the helm 

seat is adjustable. A 6-way electrical slider mecha-

nism is mounted under the driver’s seat. This allows 

the driver of the boat to adjust his or her portion of 

the helm seat to meet his or her needs. To adjust the 

helm seat, push the seat adjustment control lever in 

the desired direction you want the seat to go and then 

release to lock the seat into the desired position. 

There is approximately six inches of fore and aft 

adjustment available. The helm seat includes flip-up 

bolsters. By simply flipping up the bolster the driver 

and/or passenger is able to sit higher in the seat. This 

is designed to give the driver and passenger greater 

Summary of Contents for V475






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands