Four Winds V475 Owner'S Manual Download Page 127

Page: 127 / 189

Owner’s Manual Page 125

Exterior Equipment - Section M

Figure M15: Transom Table Option

M - 11 BOW PLATFORM

The V475 models are designed with an integrated

bow platform. This bow platform provides a functional

base for anchoring. The anchor is stored in the anchor

chute of the platform. The anchor chute and bow roller

provide support for the chain/rope and anchor. See

Figure M16. Refer to Chapman’s Piloting, Seaman-

ship and Small Boat Handling or local anchorage

authority for anchor type and size recommendation.

To pre vent a possible man overboard situation,

NEVER stand on, or try to utilize the bow

platform in any way while the boat is under way.

Figure M16: Integrated Bow Platform

M - 12 WINDLASS

A wind lass is an electri cally con trolled winch mech-

anism for retrieving the anchor. The mechanical winch

portion is mounted inside the anchor locker, at the

bow. See Figure M17. The wind lass can be controlled

by a set of foot pads (electrical switch es) mounted on

the foredeck or it can be operated from the helm.

Circuit breakers are located on the helm and aft circuit

breaker panels. Refer to the manu facturer’s literature

included in the owner’s packet for windlass operation.

Figure M17: Windlass

Along with the windlass comes an anchor, rope and

chain. The anchor line is stored in the anchor line

locker located underneath the anchor locker lid. The

locker keeps the line secure while underway and

keeps the deck clear of unsightly anchor line when

docked. See Figure M17.

To prevent personal injury, keep clear of the

windlass at all times.

Always be sure to raise and secure the

anchor prior to operating your boat. Failure

to raise and secure anchor before getting

underway could result in severe injury or

damage to boat from rebounding anchor.

Always utilize the chain stop provided with the

windlass. The chain stop prevents the anchor

from accidently releasing while the boat is

moving thus preventing damage to the boat or

possible injury or death to individual(s) aboard

the boat. See Figures M17 and M18.

Angled Leg

Table

Drinkholder

Mount

Anchor Chute

Bow Roller

Anchor

Windlass

Foot

Switches

Windlass

Anchor

Locker Lid

Chain Stop

Summary of Contents for V475






























































































































































































Search results

Summary of Contents for V475

Reviews:

Related manuals for V475

Brands by name

Popular brands

Four Winds V475, Owner'S Manual

Search results

Summary of Contents for V475

Reviews:

Related manuals for V475

Brands by name

Popular brands