background image

Owner’s Manual Page 136

Upholstery - Section N

 

 

 

 

 

•Armorall

 

 

 

 

 

•Murphy’s Oil Soap, 

 

 

 

 

 

•Son-of-a-Gun 

 

 

 

 

 

•Bleach / Baking Soda

 

 

 

 

 

•Turtle Wax

 

 

 

 

 

•Tar Remover

NOTICE

Failure to care for your vinyl properly, or use of 

improper cleaners may void your warranty and 

damage your vinyl.

NOTICE

When docking or mooring your boat be aware 

of your surroundings i.e. trees with pollen, wet 

leaves, berries etc. These and other items can 

contain dyes that stain permanently. Utilize 

weather covers whenever possible to protect 

vinyl from potential stains.

NOTICE

ALWAYS CLEAN STAINS IMMEDIATELY!  

DO NOT use Formula 409™ Fantastik™, 

Simple Green™, Armorall™, Murphy’s Oil 

Soap™, Son-of-a-Gun™, Bleach / Baking 

Soda, Turtle Wax™ or Tar Remover on vinyl. 

Do not use kerosine, gasoline or acetone as 

they will remove the protective marine topcoat.

NOTICE

All cleaning methods must be followed by  

a thorough rinse with water and drying. 

Additional cleaning information is provided by the 

manufacturer and is included with this man ual.

Four Winns offers a variety of optional weather covers 

for protection of the boat and associated equipment. 

Continued exposure can damage the upholstery and 

seating. The seating can become thoroughly satu-

rated with water if not adequately protected. Refer to 

Section O - Weather Cov ers for more information.

NOTICE

The appearance and longevity of the exterior 

upholstery will be affected by water satura tion. 

Protect these items appropriately.

B.  Exterior Carpets

The removable exterior grade carpeting may be 

periodically washed with mild laundry soaps or 

sham pooed, dried and re installed. It is 100% UV stabi-

lized Olefin

 polypropylene fiber with rubber backing. 

See Figure N27.

NOTICE

Prior to using any mild laundry soaps or carpet 

shampoo, always conduct a color-fast test on a 

small inconspicuous portion of carpet before 

applying to entire carpet.

NOTICE

DO NOT dry carpeting in an automatic dryer.

Cockpit

Lay-In Carpet

Figure N27:  Cockpit Lay-in Carpet

C.  Cleaning and Maintenance

The following informa tion should be useful in helping 

you keep your carpet looking well main tained.

Carpet made with Olefin

 fiber possesses built-in 

stain and soil release for easy, less costly mainte-

nance. Regular vacuuming and occasional sham-

pooing will help it stay attractive and serviceable.

D.  Stain Removal Testing

Even the most stubborn stains can be removed from 

Olefin fiber following the procedures outlined. Stains 

were selected as being representative of spills 

commonly occurring on carpets. Stains were pressed 

into the carpet to simu late foot pressure following a 

spill. Stains were applied to a two-inch square section 

and allowed to penetrate. Removal was performed 

after two weeks. Carpets were tested for stain removal 

by an independent laboratory. Stain removal was 

effective for all the stains selected. Results are shown 

in the table on the following page.

Summary of Contents for V475






























































































































































































Reviews: