Fotric 340M Series, User Manual

Page: 24 / 102

19
2. When the laser is turned on, the symbol will be displayed on the screen,
and the position and distance of the laser spot will also be displayed on the
screen.
3. To turn off the laser, release the Laser button .
To automatically update the test distance, select System Menu
→
(Settings)
→
Save Options and Storage
→
Measure Distance. (In real-time mode, it will not
affect the distance setting in temperature measurement parameters.)
！
Note: The laser distance calculation takes about 2 seconds.
！
Note: Retain two decimal places for the laser ranging.
！
Note: Use m2 as the area unit when the distance unit is meters; use ft2 as the
area unit when the distance unit is feet.
！
Note: If the target reflection is too low or the target is at certain angle to the
laser beam, there may be no return signal and the distance cannot be measured.
3.10 Measuring Areas (available for 340A series)