background image

5

Safety Information

This product complies with the restrictions for Class A digital equipment in Chapter 15 
of the FCC Rules. These restrictions are designed to prevent harmful interference to 
civilian installations. If not installed and used in strict accordance with the instructions, 
this equipment will generate, use and emit radio frequency energy, which may cause 
harmful interference to radio communications.

Definition

! Warning >

 Represents a hazardous situation or behavior that could result in 

personal injury or death.

! Caution >

 Represents conditions or actions that could result in damage to the 

instrument or permanent loss of data.

! Notice > 

Represents useful information for users.

Important information

Please read before using the equipment 

! Warning >

This is a class A product. In a domestic environment this product 

may cause radio interference in which case the user may be required to take 
adequate measures.

! Warning > 

Do not disassemble or do a modification to the battery of the 

thermal imager. 

The battery contains safety and protection devices, which, if damage occurs, can 
cause the battery to become hot, or cause an explosion or an ignition.

If there is a leak from the battery and you get the fluid in your eyes, do not rub 

your eyes. Flush well with water and immediately get medical care. The battery 

Summary of Contents for 340M Series







































































































Reviews: