Fotric 340M Series, User Manual

Page: 11 / 102

6
fluid can cause injury to your eyes if you do not do this.
! Warning > The thermal imager is equipped with a laser pointer. Do not look
directly into the laser beam. The laser beam can cause eye irritation.
! Caution > The thermal imager uses a very sensitive thermal sensor, do not
point the infrared camera (with or without the lens cover) at strong energy
sources, for example, devices that cause laser radiation, or the sun. This can have
an unwanted effect on the accuracy of the camera. It can also cause damage to
the detector in the camera.
! Caution > Original packing box must be used during transportation. Please do
not strongly hit the thermal imager during use and transportation.
! Caution > When storing the thermal imager, it is recommended to use the
original packing box and place it in a cool and dry place, away from strong
electromagnetic field.
! Caution > Please avoided oil and various chemical substances to contaminate
or damage the surface of the lens. Please cover the lens with cap after use.
! Caution > Do not use the camera in temperatures higher than +50°C (+122°F),
unless other information is specified in the user documentation or technical data.
High temperatures can cause damage to the camera.
! Caution > In order to prevent potential risk of data loss, please copy (back up)
the data to a computer periodically.
! Caution > Please do not open the thermal imager’s shell or modify it without
permission. Repair services can only be performed by authorized FOTRIC
personnel.
! Notice > After the thermal imager is turned on, it may take about 15 minutes
to warm up before accurate measurement.
! Notice > Every thermal imager’s temperature correction has been performed
before delivered from factory.